Repair and service Audi A8 in body D2 with 1994 for 1999 of release.
1. Car operation
2. Maintenance service
3. Petrol engines of 2,8 l
4. Petrol engines of 3,7 and 4,2 l
5. Diesel engines of 2,5 l
6. Diesel engines of 3,3 l
7. Systems of ignition and injection of fuel of petrol engines
8. System of release of the fulfilled gases of cars with petrol engines
9. The power supply system of diesel engines
10. System of prestarting heating of diesel engines
11. System of release of the fulfilled gases of cars with diesel engines
12. Greasing system
13. Cooling system
14. Coupling
15. A transmission
16. Shaft of a drive of forward wheels
17. Features of a design of transmission of all-wheel drive cars
18. A suspension bracket
19. Wheels and tyres
20. A steering
21. Brake system
22. A body
22.1. The general data
22.2. Care of a body
22.3. Care of an upholstery and rugs
22.4. Repair of insignificant damages of a body
22.5. A forward bumper
22.6. Adjustment of position of a forward bumper
22.7. A back bumper
22.8. Adjustment of position of a back bumper
22.9. Check of the shock-absorber of blow
22.10. A forward wing
22.11. A cowl
22.12. Radiator facing
22.13. A cable of opening of the lock of a cowl
22.14. A door upholstery
22.15. A forward door and a door arm
22.16. Glass of a forward door
22.17. Стеклоподъемник a forward door
22.18. The lock of a forward door
22.19. The handle of a forward door
22.20. Wind and back has flown down
22.21. A ware box
22.22. The cylinder of the lock of a ware box
22.23. Casings of a steering column
22.24. The central console
22.25. An internal rear-view mirror
22.26. The internal rear-view mirror fixed on a roof
22.27. The panel of devices
22.28. A forward seat
22.29. A pillow of a back seat
22.30. A back of a back seat
22.31. A carpet covering
22.32. Elements of an upholstery of an interior
22.33. A windscreen cleaner
22.34. Washer nozzles
23. Heating and air-conditioning system
24. An electric equipment
25. Electric schemes
 










22-7-zadnijj-bamper.html

22.7. A back bumper


Fig. 16–6. A back bumper: 1 – a nut; 2 – an arm; 3 – a bolt, 12 Нм; 4 – a bolt, 2,5 Нм; 5 – an overlay; 6 – the blow shock-absorber; 7 – a nut (till 1994) or (a bolt since 1995), 23 Нм; 8 – an extending percussion cap; 9 – the bumper amplifier; 10 – an arm; 11 – a bolt, 65 Нм; 12 – a bumper


The back bumper is shown on fig. 16–6.

The note
For access to a bolt 3 (fig. 16–6 see) it is necessary to remove internal furnish of a luggage carrier and a sealing ring, access to the right bolt is possible only after removal of the storage battery.

Removal
Remove the bottom overlay of a back bumper.
Unscrew bolts 11 (fig. 16–6 see) bumper fastenings.
Having pulled back, remove a bumper from lateral directing arms.

Installation
Installation is spent to sequences, return to removal.


22.6. Adjustment of position of a forward bumper

22.8. Adjustment of position of a back bumper