|
22-15-perednyaya-dver-i-kronshtejjn-dveri.html
22.15. A forward door and a door armRemoval
Remove a door upholstery.
Disconnect at doors electric sockets.
Disconnect a hose of system of the central blocking of doors from the activator.
Disconnect draught from the internal handle of opening of a door.
Disconnect an electric socket from стеклоподъемника.
|
|
Fig. 16–24. A forward door and an arm: 1 – a bolt, 30 Нм; 2 – a door; 3 – a door arm; 4 – an adjusting wedge; 5 – a bolt, 30 Нм; a, b, c, d — sequence of an inhaling of bolts
|
Unscrew bolts 1 and 5 (fig. 16–24 see) and remove from a door an arm.
|
|
Fig. 16–22. An arrangement and fastening of elements of protection of salon from lateral blow: 1 – a bolt; 2 – a cap; 3 – a core; 4 – the basis; 5 – an elastic cord; 6 – the goffered cover
|
If necessary remove a cap 2 (fig. 16–22) and unscrew bolts of 1 fastening of a core of 3 protection of salon from lateral blow. A core 3 and the basis of 4 protection of salon from lateral blow are stuck together among themselves and should not be separated.
|
|
Fig. 16–23. Elements of fastening of the top loop of a forward door: 1 – nuts, 30 Нм;
2 – a door loop; 3 – bolts, 30 Нм; 4 – nuts
|
Door removal spend together. While one supports a door, another unscrews nuts of fastening of loops of a door to a forward rack of the car and removes a door (fig. 16–23 and 16–25).
|
|
Fig. 16–25. Elements of fastening of the bottom loop of a forward door (arrows specify places of greasing of a loop): 1 – nuts; 2 – nuts,
30 Нм; 3 – bolts, 30 Нм
|
Installation
Installation is spent to sequences, return to removal, taking into account the following.
Establish a door.
Establish an arm at a door and fix its bolts 1 and 5 (fig. 16–24 see) located on a diagonal.
Establish between a door 2 and an arm 3 adjusting wedges 4 and screw in longer bolts of 1 and 5 fastenings of an arm. The adjusting wedge is used for adjustment of position of a door concerning a rack.
Tighten bolts of fastening of bolts in sequence a, b, c, d.
|
|