|
22-16-steklo-perednejj-dveri.html
22.16. Glass of a forward door
|
|
Fig. 16–26. Glass of a forward door: 1 – a bolt, 2 Нм; 2 – a washer; 3 – forward lateral glass; 4 – the plug; 5 – a directing pin; 6 – an upholstery cover; 7 – a door arm; 8 – the terminator; 9 – spring bracket; 10 – a washer; 11 – damper
|
On fig. 16–26 fastening of glass of a forward door is shown.
Removal
Remove a door upholstery.
Remove an arm from a door.
|
|
Fig. 16–27. Elements of the bottom fastening of glass of a forward door: 1 – spring bracket; 2 – a washer; 3 – damper; 4 – a directing pin
|
Small screw-driver take out spring bracket 1 (fig. 16–27) from a groove of a directing pin 4 and remove a washer 2.
A little move glass from a directing pin and lower a pin on the directing.
Remove from a directing pin damper 3.
|
|
Fig. 16–28. Elements of fastening of a directing pin: 1 – a bolt, 2 Нм; 2 – a washer;
3 – forward lateral glass; 4 – the plug; 5 – a directing pin; 6 – an upholstery cover
|
Remove directing pins of forward and back fastenings of glass. A drill in diameter of 5 mm drill the central part of a bolt 1 (fig. 16–28) and remove elements of fastening of a directing pin.
Raising a back part has flown down and simultaneously turning it, take glass outside from a window doorway.
Installation
In sequence, return to removal, establish glass at a door and fix it on directing pins.
Put контровочный structure D 185400 A2 on a carving of new bolts of fastening forward and back directing glasses. Establish from the interior of glass directing pin and the plug, fix them from lateral aspect a bolt with a washer, having tightened a bolt the moment 2 Нм. Establish on directing pins of a cover of an upholstery (fig. 16–28 see).
At installation of the bottom fastening of glass combine a groove of glass with a directing pin and fix its spring bracket with a washer and damperом (fig. 16–28 see).
|
|
Fig. 16–29. An arrangement of the top emphasis (1) on салазке a directing pin for glass adjustment in the lifted condition
|
Adjust position of the lifted glass by rotation of the top emphasis on салазке a directing pin (fig. 16–29).
Adjust position of an upper edge of glass in relation to an internal ledge of consolidation of glass. Adjustment has flown down is spent on the closed door.
Adjust glass so that its top part in regular intervals adjoined to consolidation and pressed a consolidation edge on 1 mm. If glass is strongly pressed into consolidation the door will be closed with the big effort.
|