|
22-17-steklopodemnik-perednejj-dveri.html
22.17. Стеклоподъемник a forward doorRemoval
Remove a door upholstery.
Remove an arm from a door.
|
|
Fig. 16–27. Elements of the bottom fastening of glass of a forward door: 1 – spring bracket; 2 – a washer; 3 – damper; 4 – a directing pin
|
Small screw-driver take out spring bracket 1 (fig. 16–27) from a groove of a directing pin 4 see and remove a washer 2.
A little move glass from a directing pin and lower a pin on the directing.
Remove from a directing pin damper 3.
Disconnect from the engine стеклоподъемника an electric socket.
|
|
Fig. 16–30. Стеклоподъемник a forward door: 1 – стеклоподъемник a forward door; 2 – rivets; 3 – a door arm; 4 – the engine стеклоподъемника; 5 – a bolt, 10 Нм; 6 – a clip; 7 – a directing pin; 8 – damper; 9 – a washer; 10 – spring bracket
|
Drill rivets 2 (fig. 16–30) fastenings стеклоподъемника and remove стеклоподъемник.
Installation
Installation is spent to sequences, return to removal, taking into account the following.
For fastening стеклоподъемника use only original rivets. Installation of rivets begin with a forward top rivet of fastening of the mechanism стеклоподъемника.
Connect "a weight" wire to the storage battery.
Lift glasses electric glass lifts upwards against the stop. Then press all switches стеклоподъемника once again, at least for 1 second, in position of closing for activation of the block of management glass lifts.
|