|
22-14-obivka-dveri.html
22.14. A door upholstery
|
|
Fig. 16–12. A door upholstery: 1 – an internal upholstery of a door; 2 – the alarm lamp of an open door; 3 – a clip; 4 – the holder of a clip; 5 – a bolt. 1,7 Нм; 6 – the blocking button; 7 – a protective film (arrows places of fastening are shown by its sticky tape); 8 – the decorative panel; 9 – a bolt, 1,8 Нм; 10 – the internal handle of opening of the lock of a door; 11 – the top section of an overlay with switches; 12 – bolts, 1,8 Нм; 13 – the basis of the internal handle of a door; 14 – the bottom section of an overlay with switches; 15 – the screw; 16 – bolts, 4,6 Нм; 17 – a lamp of illumination of space at an input and an exit of passengers
|
Removal
|
|
Fig. 16–13. Elements of fastening of the decorative panel to a door upholstery: 1 – the holder of a clamp; 2 – a clamp; 3 – the decorative panel
|
Screw-driver edge as the lever separate the decorative panel from a door upholstery, thus clamps of the decorative panel should leave holders in a door upholstery (fig. 16–13).
Press on distance about 4 mm clamps 2 in 1 clamps extending holders and remove holders of clamps from a door upholstery.
|
|
Fig. 16–14. Use of a screw-driver for branch from an upholstery of a door of the basis of the internal handle of a door
|
Using a screw-driver edge as the lever, separate from an upholstery the basis of the internal handle of a door and remove it (fig. 16–14).
|
|
Fig. 16–15. An arrangement of screws (3) fastenings of the top section of an overlay with switches (2) to an upholstery of a door (1)
|
Through opened aperture turn away two screws of fastening of the top section of an overlay with switches (fig. 16–15).
Raise a back part of the top section of an overlay with switches and, having pulled back, disconnect a forward part from a door upholstery. Disconnect from switches electric sockets.
|
|
Fig. 16–16. An arrangement of screws of fastening of an upholstery of a door
|
Turn away two screws of fastening of an upholstery of a door to a door arm (fig. 16–16).
|
|
Fig. 16–17. An arrangement of the screw (1) fastenings of a back insert (2) to a glass framework
|
Turn away the screw and remove a back insert of a framework of glass (fig. 16–17).
|
|
Fig. 16–18. An arrangement of a bolt (1) fastenings of the bottom section of an overlay with switches (2) and an electric socket (3)
|
Turn away the screw and, moving back, remove from a door upholstery the bottom section of an overlay with switches (fig. 16–18).
|
|
Fig. 16–19. An arrangement разжимных clamps (1) fastenings of an internal upholstery of a door
|
Using the tool in the form of a flat plug, separate an upholstery from a door (fig. 16–19).
Remove разжимные clamps from a door upholstery.
Lifting a door upholstery upwards, remove its top part from the button of blocking of the lock of a door.
Incline an upholstery of a door and disconnect an electric socket from the switch of the lock of a door.
|
|
Fig. 16–20. An arrangement of a clip (1) fastenings of draught (2) internal handles of opening of a door and a clamp (3) fastenings of the internal handle of opening of a door
|
Using a screw-driver edge as the lever, remove a clip of fastening of draught of the internal handle of opening of a door (fig. 16–20).
|
|
Fig. 16–21. An arrangement of the screw (1) fastenings of an air branch pipe (2) to a door upholstery
|
Turn away the screw and remove from a door upholstery an air branch pipe (fig. 16–21).
Disconnect all fastenings of a plait of wires from an upholstery of a door and remove a plait of wires.
Remove a protective film from a door.
Installation
Before installation of an upholstery of a door check up a condition разжимных clamps of an upholstery and if necessary replace the damaged clamps. Establish clamps in grooves in a door upholstery.
The door upholstery is established in sequence, return to removal.
Connect "a weight" wire to the storage battery.
|
|