|
22-6-regulirovka-polozheniya-perednego-bampera.html
22.6. Adjustment of position of a forward bumperAdjustment of position of a forward bumper in the blow shock-absorber
|
|
Fig. 3.2–1. An arrangement of the screw of fastening of the left ventilating lattice
|
Turn away screws of fastening of the left and right ventilating lattices of a bumper and remove lattices (fig. 3.2–1 see).
|
|
Fig. 16–2. Fastening of a forward bumper (2) to the shock-absorber of blow (3: 1) – a bolt
|
From below a bumper unscrew bolts of fastening of a bumper (fig. 16–2 see).
|
|
Fig. 16–5. Adjustment of position of a forward bumper in the blow shock-absorber: 1 – a bolt; 2 – an arm; 3 – the blow shock-absorber; 4 – the carving plug; 5 – a face key; 6 – the bumper amplifier
|
Through an aperture for ventilating lattices insert a face key 5 (fig. 16–5) into the carving plug 4 shock-absorbers of blow 3.
Rotating in this or that party the carving plug 4 in the shock-absorber of blow 3, adjust position of a forward part of a bumper on height.
Screw in bolts of fastening of a bumper.
Establish and fix ventilating lattices.
Adjustment of position of a forward bumper in an arm
Unscrew a bolt 1 (fig. 16–5 see) fastenings of a lateral arm of a bumper on some turns.
Adjust position of lateral parts of a bumper in relation to forward wings, moving an arm 2 forward or back.
Tighten a bolt of fastening of a lateral arm of a bumper.
|