|
22-27-panel-priborov.html
22.27. The panel of devicesRemoval
|
|
Fig. 16–61. The panel of devices: 1 – a nut, 6 Нм; 2 – the block of management ABS/EDL; 3 – a bolt, 1,5 Нм; 4 – a ventilating lattice; 5 – the panel of devices; 6 – a bolt, 45 Нм; 7 – a lining; 8 – a nut; 9 – an arm of a forward rack; 10 – the basis of the panel of devices; 11 – a nut, 10 Нм; 12 – bolts, 10 Нм; 13 – an arm of the panel of devices; 14 – a bolt, 22 Нм; 15 – a bolt, 7 Нм; 16 – an arm; 17 – a nut; 18 – an air line; 19 – an arm of support of the panel of devices; 20, 21 – bolts, 22 Нм; 22 – screws, 2,5 Нм, 23 – the bottom overlay of a steering column
|
Close seats of the driver and the forward passenger a coverlet.
Include ignition.
On cars with electric adjustment of seats move them back against the stop.
Establish the helmsman a wheel for movement directly forward.
Close folding shutters of ventilating apertures for what press button "Def" control panels the conditioner.
Before a detachment of the storage battery find out, whether there is at you a code of inclusion of a radio receiver.
Switch off ignition and disconnect a wire of "weight" from the storage battery.
Turn away screws and remove the bottom furnish of the panel with a ware shelf from outside the driver.
Turn away screws and remove a ventilating lattice in deepening for feet of the driver.
Disconnect an electric socket from an illumination lantern in deepening for feet of the driver and remove a lantern.
Remove overlays of thresholds of forward doors.
Remove the central console.
Remove a steering wheel.
Remove заглушки, located under a combination of devices for what, pressing, move them to the centre.
|
|
Fig. 16–62. Unscrewing of a bolt of fastening of a combination of devices
|
Turn away two bolts and remove a combination of devices (fig. 16–62).
Disconnect electric sockets from a back part of a combination of devices.
On models with electric adjustment of position of a steering column disconnect an electric socket from the switch of adjustment of position of a steering column. Unscrew bolts of fastening of the switch and remove it.
Remove a ring of self-return with an electric socket and a sliding ring.
|
|
Fig. 16–63. Elements of fastening of switches of a steering column: 1 – the left switch of a steering column; 2 – the screw;
3 – tightening a bolt; 4 – the right switch of a steering column
|
Unscrew the top screw 2 (fig. 16–63) fastenings of the case of switches of a steering column.
Remove the right switch 4 steering columns together with the wires connected to it.
Loosen the tightening a bolt 3 also remove the left switch of 1 steering column.
Disconnect electric sockets from switches.
|
|
Fig. 16–64. An arrangement of the screw (1) with a washer (2) fastenings of the bottom overlay (3) steering columns
|
Turn away screws 1 and remove the bottom overlay 3 steering columns (fig. 16–64).
On cars with an automatic transmission disconnect a cable from the lock of the lever of the selector, turn a key in the lock of ignition and remove a cable.
Unscrew bolts of fastening of a steering column and lower it downwards. Do not pull a steering column on itself and do not unscrew a nut of fastening of the universal hinge of a steering column.
Unscrew the block of management ABS/EDL from the basis of the panel of devices.
At presence separate the auxiliary relay from the basis of the panel of devices.
|
|
Fig. 16–65. An arrangement of screws (1, 3) fastenings of an arm (2) supports of the panel of devices
|
Unscrew screws 1 and 3 (fig. 16–65) and remove an arm of 2 supports of the panel of devices from the basis of the panel of devices and the transmission tunnel.
Disconnect an electric socket from the proof-reader of light of headlights.
Remove a safety pillow from outside the passenger.
|
|
Fig. 16–66. An arrangement of bolts (1) fastenings of the holder (2) to an arm of a pedal and bolts (3) bottom fastenings of the holder
|
Unscrew bolts 1 (fig. 16–66) fastenings of the holder 2 to a pedal arm.
|
|
Fig. 16–67. Fastening of the panel of devices to an arm of a forward rack: 1 – a bolt; 2 – a lining; 3 – a nut
|
Unscrew bolts of fastening of the panel of devices to arms of the left and right forward racks (fig. 16–67).
|
|
Fig. 16–68. A detachment of an air line from a casing of the distributor of air
|
Disconnect air lines from the left and right party of a casing of the distributor of air (fig. 16–68).
Pull the panel of devices back and remove it. Operation carry out with the assistant.
Installation
Establish the panel of devices in the car.
Check up and if necessary adjust position of the panel of devices on height selection of a lining 2 (fig. 16–67 see) demanded thickness. The panel of devices should settle down at level of an upholstery of forward doors.
Screw in bolts of fastening of the panel of devices to arms of the left and right forward racks (fig. 16–67 see).
Loosen the bolts 3 (fig. 16–66 see) bottom fastening of the holder that it could be moved.
Screw in bolts of 1 fastening of the holder 2 to an arm of a pedal and tighten their moment 22 Нм. Tighten bolts 3 bottom fastenings of the holder by the moment 10 Нм.
The further installation is spent to sequences, return to removal.
|