|
22-22-cilindr-zamka-veshhevogo-yashhika.html
22.22. The cylinder of the lock of a ware boxRemoval
For removal of the cylinder of the lock of a ware box it is necessary to use a screw-driver in diameter 1,6 and length 40 mm.
Remove a ware box and put it in deepening for feet of the passenger.
|
|
Fig. 16–41. Position of a key and an arrangement of an aperture for a screw-driver at removal of the cylinder of the lock of a ware box
|
Insert and turn on 45 a key in the cylinder of the lock of a ware box (fig. 16–41).
|
|
Fig. 16–42. Use of a screw-driver for clearing of the cylinder of the lock of a ware box
|
Insert a screw-driver into an aperture for clearing of the cylinder of the lock and, pressing a screw-driver upwards, take the cylinder of the lock of a ware box with the inserted key (fig. 16–42).
|
|
Fig. 16–43. Easing of a bolt with crosswise шлицем through an aperture for the lock cylinder
|
Through an aperture for the lock cylinder loosen the a bolt with crosswise шлицем while clamps will not move back, and remove forward запорный the mechanism (fig. 16–43).
|
|
Fig. 16–44. An arrangement of a nut with накаткой fastenings of a cable of the lock of a ware box
|
Turn a nut with external накаткой cable fastenings, disconnect a cable from the lock of a ware box and remove the lock (fig. 16–44).
Installation
Installation is spent to sequences, return to removal, taking into account the following.
If the ware box is not closed properly, adjust length of a cable an adjusting nut.
|
|