|
22-5-perednijj-bamper.html
22.5. A forward bumper
|
|
Fig. 16–1. A forward bumper: 1 – the central ventilating lattice; 2 – the screw, 1 Нм; 3 – a bumper; 4 – наполнитель; 5 – an extending percussion cap; 6 – the blow shock-absorber; 7 – a nut (till 1994) or a bolt (since 1995), 23 Нм; 8 – a bolt, 12 Нм; 9 – a nut; 10 – an arm; 11 – a nut; 12 – the bumper amplifier; 13 – a bolt, 65 Нм; 14 – a ventilating lattice; 15 – the holder of licence plate
|
Removal
|
|
Fig. 16–2. Fastening of a forward bumper (2) to the shock-absorber of blow (3: 1) – a bolt
|
Turn away screws and remove the bottom mudguard of a motor compartment (fig. 16–2)
|
|
Fig. 3.2–1. An arrangement of the screw of fastening of the left ventilating lattice
|
Turn away screws of fastening of the left and right ventilating lattices of a bumper and remove them (fig. 3.2–1 see).
On the right side disconnect from a bumper a generator air line.
On cars with washers of headlights on the right side disconnect a hose of a washer from a tee.
Release three clips and unscrew two nuts of fastening of a forward part of facing of a niche of a forward wheel.
From below a bumper unscrew bolts of fastening of a bumper (fig. 16–2 see).
Having pulled forward, remove a bumper from lateral directing arms.
|
|
Fig. 16–3. Elements of fastening of a forward bumper to the bumper amplifier: 1 – a clip; 2 – the bumper amplifier; 3 – a bumper; 4 – an extending percussion cap
|
Squeeze out extending percussion cap 4 (fig. 16–3) the top fastening of a bumper from clips.
Reject the top part of a bumper from the amplifier of a bumper and, moving downwards, remove a bumper from its amplifier.
|
|
Fig. 16–4. Elements of fastening of the holder of licence plate to a forward bumper: 1 – the holder of licence plate; 2 – screws; 3 – a clamp
|
Turn out screws of fastening 2 holders of licence plate 1 to a bumper, press lateral clamps of the holder of licence plate and remove it from a bumper (fig. 16–4).
Installation
Installation is spent to sequences, return to removal.
|