|
21-1-obshhie-svedeniya.html
21.1. The general dataTo destination and carried out funk-tsijam the brake system is divided on working, spare, lay and emergency. The working brake system with necessary efficiency provides regulation of speed of the car and its stop. The spare system serves for a car stop at failure of working brake system. The lay system serves for car deduction motionlessly on road. It basically use for deduction of the standing car, but it is possible to apply and as emergency at failure of working brake system.
On the car the working brake system with a hydraulic drive and diagonal division of contours is applied that considerably raises safety of driving of the car. At refusal of one of contours as spare brake system the second contour providing a stop of the car with sufficient efficiency is used.
In the car disk ventilated brakes on forward wheels and ventilated or with a continuous brake disk – on back are used.
The hydraulic drive of brakes is equipped by the amplifier of brakes.
The tank with the brake liquid, being in a motor compartment over the main brake cylinder, supplies brake system and coupling by a brake liquid. The vacuum amplifier of brakes reduces effort to a brake pedal, facilitating thereby driving.
|
Specifications
|
|
|
Diameter of the main brake cylinder, mm
|
23,81
|
|
Diameter of the chamber of the vacuum amplifier of brakes, inches
|
7 or 8
|
|
Strengthening factor
|
4,5
|
|
|
|
Forward brakes
|
|
|
Support of forward brake FN–3 (15/16 ")
|
|
|
Brake disk:
|
|
|
Diameter, mm
|
288 or 312
|
|
Thickness, mm
|
25
|
|
The minimum thickness, mm
|
23
|
|
Diameter of the piston of a support, 57 mm
|
57
|
|
Thickness brake pads with the basis, mm
|
19
|
|
The minimum thickness brake pads with the basis, mm
|
7
|
|
Support of forward brake HP–2 (15/16 ")
|
|
|
Brake disk:
|
|
|
Diameter, mm
|
314 or 323
|
|
Thickness, mm
|
30
|
|
The minimum thickness, mm
|
28
|
|
Diameter of the piston of a support, mm
|
42,8
|
|
Thickness brake pads with the basis, mm
|
17
|
|
The minimum thickness brake pads with the basis, mm
|
7
|
|
Support of forward brake Brembo (17 ")
|
|
|
Brake disk:
|
|
|
Diameter, mm
|
345
|
|
Thickness, mm
|
30
|
|
The minimum thickness, mm
|
28
|
|
Diameter of the piston of a support, mm
|
40,0 or 46,0
|
|
Thickness brake pads with the basis, mm
|
17
|
|
The minimum thickness brake pads with the basis, mm
|
7
|
|
Back brakes
|
|
|
Support of a back brake With 38
|
|
|
Brake disk:
|
|
|
Diameter, mm
|
245
|
|
Thickness, mm
|
10
|
|
The minimum thickness, mm
|
8
|
|
Diameter of the piston of a support, mm
|
38,1 or 36,0
|
|
Thickness brake pads with the basis, mm
|
17
|
|
The minimum thickness brake pads with the basis, mm
|
7
|
|
Support of back brake C 43 (16 ")
|
|
|
Brake disk:
|
|
|
Diameter, mm
|
269
|
|
Thickness, mm
|
20
|
|
The minimum thickness, mm
|
18
|
|
Diameter of the piston of a support, mm
|
42,8 or 40,8
|
|
Thickness brake pads with the basis, mm
|
17
|
|
The minimum thickness brake pads with the basis, mm
|
7
|
|
Support of back brake C 43 (16/17 ")
|
|
|
Brake disk:
|
|
|
Diameter, mm
|
269 or 280
|
|
Thickness, mm
|
22
|
|
The minimum thickness, mm
|
20
|
|
Diameter of the piston of a support, mm
|
42,8 or 40,8
|
|
Thickness brake pads with the basis, mm
|
17
|
|
The minimum thickness brake pads with the basis, mm
|
7
|
|
|