2.22. Check of lobbies brake pads
As practice, lobbies brake pads from outside shows the passenger wear out more intensively, therefore and to check them it is necessary on the right forward wheel.
Loosen the bolts of fastening of the right forward wheel also include a lay brake, then lift and fix on supports a forward part of the car. Remove the right forward wheel.
Fig. 2–25. Places of measurement of a thickness of lobbies brake pads
By calliper measure a thickness brake pads (fig. 2–25).
Is minimum admissible thickness and brake pads together with a bearing plate makes 7 mm.
If the overlay brake pads is worn out till the minimum thickness, it is necessary to replace all four brake pads in the complete set.
Establish wheels and lower the car.
It is established that at run of 1000 km deterioration brake pads on the average makes 1 mm.
Check back brake pads
Fig. 2–26. Check back brake pads
Check up a thickness brake pads through apertures in a wheel disk, without removing a wheel (fig. 2–26).