|
2-13-proverka-urovnya-masla-v-mekhanicheskojj-korobke-peredach.html
2.13. Check of level of oil in a mechanical transmissionIn a mechanical box it is not necessary to replace oil.
|
|
Fig. 2–18. Use of a key with face head VW 3357 for вывинчивания stoppers маслоналивного apertures from a mechanical five-speed transmission 012
|
For easing of a carving stopper маслоналивного apertures use a key with face head VW 3357 (fig. 2–18).
For доливки apply oil
G 052 911 SAE 75W–90.
Establish the car on the lift in horizontal position.
Remove the bottom mudguard of the engine.
|
|
Fig. 2–19. A stopper arrangement маслоналивного apertures of a mechanical transmission 01Е
|
|
|
Fig. 2–20. A stopper arrangement маслоналивного apertures of a mechanical transmission 01A
|
Unscrew a stopper маслоналивного apertures from a transmission which is located before the left shaft of a drive and can be closed a thermofilter of a shaft of a drive (fig. 2–19, 2–20).
Check up level of oil the bent wire.
012 front-wheel cars it should be in a five-speed transmission on 7 mm from the bottom edge of a carving aperture.
01Е and a five-speed transmission 01А the front-wheel car it should be in a six-speed transmission at the bottom edge of a carving aperture.
Oil level 01Е the all-wheel drive car should be in a six-speed transmission on 1 mm from the bottom edge of a carving aperture.
If necessary add oil through маслоналивное an aperture.
Screw in a stopper and tighten its moment 25 Нм for a transmission 012 and 01А, 40 Нм for a transmission 01Е.
|