2.10. Condition check semi wedge a belt
The tension semi wedge a belt is carried out automatically. It is necessary to check periodically a condition of a belt and at detection of defects to replace it.
Establish the gear change lever in neutral position.
Remove the bottom mudguard of the engine.
Chalk put a label on a belt.
For a bolt of fastening of a pulley turn a cranked shaft clockwise before label occurrence, thus visually check a belt condition.
On поликлиновом a belt following defects can be found out:
– Oil and greasing traces;
– Deterioration of edges wedge ledges (ribs);
– Hardening of edges of ribs;
– Cross-section cracks from a belt underside;
– отслоение separate ribs;
– разлохмачивание face edges of a belt;
– Cross-section cracks in some ribs;
– Destruction of separate ribs.
In the presence of any of defects replace a belt.
Establish the bottom mudguard of the engine.