|
24-32-pereklyuchatel-regulirovki-polozheniya-zerkala.html
24.32. The switch of adjustment of position of a mirror
|
|
Fig. 18–59. Use of a screw-driver for branch from an upholstery of a door of the basis of the internal handle of a door
|
Using a screw-driver edge as the lever, separate from an upholstery of a door the basis of the internal handle and remove it (fig. 18–59).
|
|
Fig. 18–60. An arrangement of screws (3) fastenings of the top section of an overlay (2) with switches to an upholstery of a door (1)
|
Through opened aperture turn away two screws of fastening of the top section of an overlay with switches (fig. 18–60).
Raise a back part of the top section of an overlay with switches and, having pulled back, disconnect a forward part from a door upholstery. Disconnect from switches electric sockets.
|
|
Fig. 18–61. An arrangement of clamps (1) and a direction () removals of the switch (2) adjustments of position of a mirror. At the left: an arrangement of four clamps (arrow) of fastening and a removal direction () switches windows
|
Move two clamps 1 (fig. 18–61) to the right and at the same time press the switch 2 in a direction of an arrow And, remove the switch.
Upholstery
Installation is spent to sequences, return to removal.
|
|