|
24-27-pereklyuchateli-rulevojj-kolonki.html
24.27. Switches of a steering columnRemoval
Before a detachment of the storage battery find out, whether there is at you a code of inclusion of a radio receiver.
Switch off ignition and disconnect a wire of "weight" from the storage battery.
Establish wheels for movement directly forward.
Lower a steering wheel down to an emphasis.
|
|
Fig. 18–50. Unscrewing of a bolt of fastening of a pillow of safety to a steering wheel
|
Key unscrew Torx-bolts of fastening of a pillow the safety located on each side from the back party of a steering wheel (fig. 18–50).
Incline back a safety pillow, disconnect an electric socket and remove a safety pillow.
|
|
Fig. 18–51. The Steering wheel, casings and switches of a steering column: 1 – the top casing; 2 – a screw-driver (for отвертывания the screw of fastening of switches of a steering column); 3, 5, 6 – screws, 0,6 Нм; 4 – the switch of adjustment of position of a steering column (for cars with an electric drive of adjustment of position of a steering column); 7 – the bottom casing; 8 – the screw, 0,6 Нм; 9 – a bolt, 2,5 Нм; 10 – a bolt; 11 – a steering wheel; 12 – a nut; 13 – a safety pillow
|
Turn away two screws 8 (fig. 18–51) and remove the top casing of 1 steering column.
Disconnect an electric socket from a steering wheel spiral, unscrew a nut (or a bolt) and remove a steering wheel.
Having pulled on itself, remove facing of the bottom casing.
Unscrew a nut 12 and remove a steering wheel. At steering wheel removal the electric socket of its spiral should not be disconnected.
On models with mechanical adjustment of position of a steering column unscrew the screw and remove the handle of adjustment of position of a steering column.
Turn away screws 5, 6 and a bolt 9 and remove the bottom casing 7 steering columns.
On models with electric adjustment of position of a steering column disconnect an electric socket from the switch of adjustment of position of a steering column. Turn away screws of 3 fastenings of the switch 4 and remove it.
Screw-driver 2 loosen the the screw of fastening of switches of a steering column.
Disconnect electric sockets from switches of a steering column.
Remove switches from a steering column.
Installation
Establish switches on a steering column.
Temporarily establish a steering wheel and fix its nut.
|
|
Fig. 18–52. Position of switches of a steering column at their installation: 1 – a steering wheel; 2 – switches of a steering column; 3 – the screw; and = 3 mm
|
Moving switches 2 (fig. 18–52) along a steering column, establish them in such position that the backlash and between switches and a steering wheel 1 made 3 mm, and in this position tighten the screw of 3 fastenings of switches.
The further installation is spent to sequences, return to removal.
|