Repair and service Audi A8 in body D2 with 1994 for 1999 of release.
1. Car operation
1.1. Keys
1.2. Doors
1.3. Electric glass elevators
1.4. Installation of mirrors
1.5. Seat belts
1.6. System of pillows of safety
1.7. Seats
1.8. Adjustment of a steering column
1.9. A lay brake
1.10. An automatic transmission
1.11. The ignition lock
1.12. Engine start-up
1.13. Controls, devices and the equipment
1.14. The onboard computer
1.15. Switches and switches
1.16. Cleaners and washers of glasses
1.17. Heating and ventilation
1.18. The conditioner
1.19. An independent heating system and ventilation
1.20. Management symbols
1.21. A cowl
1.22. A motor compartment
1.23. An autoradio tape recorder
2. Maintenance service
3. Petrol engines of 2,8 l
4. Petrol engines of 3,7 and 4,2 l
5. Diesel engines of 2,5 l
6. Diesel engines of 3,3 l
7. Systems of ignition and injection of fuel of petrol engines
8. System of release of the fulfilled gases of cars with petrol engines
9. The power supply system of diesel engines
10. System of prestarting heating of diesel engines
11. System of release of the fulfilled gases of cars with diesel engines
12. Greasing system
13. Cooling system
14. Coupling
15. A transmission
16. Shaft of a drive of forward wheels
17. Features of a design of transmission of all-wheel drive cars
18. A suspension bracket
19. Wheels and tyres
20. A steering
21. Brake system
22. A body
23. Heating and air-conditioning system
24. An electric equipment
25. Electric schemes
 










1-5-remni-bezopasnosti.html

1.5. Seat belts

Correctly adjusted seat belts fix position of the driver and passengers during movement and are an effective remedy of protection against serious traumas at road accident.
On the car establish seat belts with three-dot fastening.
Regulating position of points of fastening of belts of forward seats on height, it is possible to achieve the best placing of a humeral branch of a belt.

Manual adjustment

Fig. 1–12. Moving directions скобы for adjustment of position of the top fastening of a seat belt



Press the top part of a key, shift bracket a belt upwards or downwards (fig. 1–12) so that the humeral branch passed through the shoulder middle (at all through a throat) and press the bottom part of a key.
After adjustment, having pulled a belt, be convinced that bracket a belt it is reliable it is fixed.

Adjustment with the electric drive
Press the top or bottom key and keep it before moving скобы a belt upwards or downwards that the humeral branch passed through the shoulder middle.
To modify belt position it is possible, having adjusted seat position on height.

Memory of height of installation of a seat belt
At the cars equipped with a memory of position of sitting of the driver, the height of installation of a seat belt also is fixed.
First of all it is necessary to establish sitting position, and then seat belt position.

Натяжители seat belts
Degree of safety of the driver and the passengers fastened by belts, will raise thanks to installation натяжителей in automatic devices of taking - up of forward belts.
The seat belt should not pass through the cast away back of a seat as in case of collision back натяжители will work.
The system is put in action by special sensor controls in case of strong front blow. In the taking up automatic machine of each put on seat belt it is set fire пиропатрон therefore seat belts stretch.
At easy head-on collisions, lateral blows and blows in a back part of the car, at overturning and so forth when there are no considerable movements of energies directed in a direction, натяжители in action are not resulted.

The note
At operation натяжителей the smoke is allocated. It does not testify at all to occurrence of a seat of fire on the car.

Fig. 1–13. An arrangement of the switch for adjustment of position of the top fastening of a seat belt




1.4. Installation of mirrors

1.6. System of pillows of safety