|
18-6-perednijj-stabilizator-poperechnojj-ustojjchivosti.html
18.6. The forward stabilizer of cross-section stabilityRemoval
|
|
Fig. 3.1–1. An arrangement of clamps of fastening of the bottom mudguard of a motor compartment
|
Release clamps and remove the bottom mudguard of a motor compartment (fig. 3.1–1 see).
|
|
Fig. 12–15. An arrangement of a nut (1) fastenings of an earring and bolts of fastening (2) arms of the stabilizer
|
Unscrew a nut 1 and remove a stabilizer earring (fig. 12–15).
Unscrew bolts of fastening of 2 arms of the stabilizer.
|
|
Fig. 12–16. Fastening of an earring of the stabilizer of cross-section stability: 1 – a stabilizer earring; 2 – the bottom cross-section lever; 3 – самоконтрящаяся a nut, 40 Нм + to tighten on a corner 90 ; 4 – a clip; 5 – самоконтрящаяся a nut, 90 Нм; 6 – the stabilizer of cross-section stability
|
Installation
Installation is spent to sequences, return to removal, taking into account the following.
The arrow on a stabilizer earring specifies a moving direction.
Before ввинчиванием bolts of fastening of an arm of the stabilizer by means of a tap clear a carving in apertures for bolts.
If the stabilizer was replaced, establish on it rubber plugs without greasing
|