Repair and service Audi A8 in body D2 with 1994 for 1999 of release.
1. Car operation
2. Maintenance service
3. Petrol engines of 2,8 l
4. Petrol engines of 3,7 and 4,2 l
5. Diesel engines of 2,5 l
6. Diesel engines of 3,3 l
7. Systems of ignition and injection of fuel of petrol engines
8. System of release of the fulfilled gases of cars with petrol engines
9. The power supply system of diesel engines
10. System of prestarting heating of diesel engines
11. System of release of the fulfilled gases of cars with diesel engines
12. Greasing system
13. Cooling system
13.1. The general data
13.2. The thermostat
13.3. Replacement of a cooling liquid
13.4. The water pump of petrol engines of 2,8 l
13.5. Connecting pipes of system of cooling
13.6. The water pump of petrol engines of 3,7 and 4,2 l
13.7. The thermostat of petrol engines of 3,7 and 4,2 l
13.8. The water pump of diesel engines of 2,5 l
13.9. The thermostat of the diesel engine of 2,5 l
13.10. Forward section of a pipe of system of cooling of the diesel engine of 2,5 l
13.11. The left section of a pipe of system of cooling of the diesel engine of 2,5 l
13.12. The right section of a pipe of system of cooling of the diesel engine of 2,5 l
13.13. The central section of a pipe of system of cooling of the diesel engine of 2,5 l
13.14. The water pump of diesel engines of 3,3 l
13.15. The thermostat of diesel engines of 3,3 l
13.16. A forward average pipe of system of cooling of the diesel engine of 3,3 l
13.17. The left average pipe of system of cooling of the diesel engine of 3,3 l
13.18. A radiator
14. Coupling
15. A transmission
16. Shaft of a drive of forward wheels
17. Features of a design of transmission of all-wheel drive cars
18. A suspension bracket
19. Wheels and tyres
20. A steering
21. Brake system
22. A body
23. Heating and air-conditioning system
24. An electric equipment
25. Electric schemes
 










13-14-vodyanojj-nasos-dizelnykh-dvigatelejj-3-3-l.html

13.14. The water pump of diesel engines of 3,3 l

Removal
Merge cooling liquid.
Remove a gear belt.

Fig. 3.4–55. An arrangement of bolts of fastening of a directing roller and a back casing of a gear belt



Unscrew a bolt of fastening of a directing roller (fig. 3.4–55 see).
Unscrew bolts and remove a back casing of a gear belt (fig. 3.4–55 see).

Fig. 7–24. The water pump and the thermostat of cars with diesel engines of 3,3 l: 1 – a bolt, 10 Нм; 2 – a sealing ring; 3 – the gauge of temperature of a cooling liquid, 25 Нм; 4 – the thermostat case; 5 – a bolt, 22 Нм; 6 – sealing rings; 7 – the thermostat; 8 - a lining; 9 – a bolt, 10 Нм; 10 – the water pump


Fig. 7–25. An arrangement of bolts of fastening of the water pump on diesel engines of 3,3 l



Unscrew bolts and remove the water pump (fig. 7–25).

Installation
Installation is spent to sequences, return to removal, taking into account the following.
At installation it is necessary to use a new sealing ring and linings.
At installation of the thermostat the valve for air removal should settle down from above.
Turning a shaft of the water pump, check up a condition of bearings of the water pump and if necessary replace them.
Establish a gear belt.
Fill in cooling liquid.


13.13. The central section of a pipe of system of cooling of the diesel engine of 2,5 l

13.15. The thermostat of diesel engines of 3,3 l