13.10. Forward section of a pipe of system of cooling of the diesel engine of 2,5 l
Before a detachment of the storage battery find out, whether there is at you a code of inclusion of a radio receiver.
Switch off ignition and disconnect a wire of "weight" from the storage battery.
Merge cooling liquid.
Remove a gear belt from camshaft pulleys.
Remove a pulley from the right camshaft.
Remove forward section of an inlet collector.
Fig. 3.3–58. An arrangement of screws of fastening left (1), top (2) and the right (3) casings of a gear belt
Unscrew screws and remove top 2 (fig. 3.3–58 see). Section of a casing of a gear belt
Turn away screws and remove left 1 and the right 3 casings of a gear belt.
Fig. 7–20. An arrangement of bolts of fastening of forward section of a pipe of system of cooling of the diesel engine of 2,5 l
Loosen the collars, unscrew three bolts and forward section of a pipe of system of cooling from a forward part of the engine (fig. 7–20 see).
Installation is spent to sequences, return to removal, taking into account the following.
Grease a new sealing ring with structure G 012 A8 D and establish on forward section of a pipe of system of cooling.
Establish a gear belt.
Fill in cooling liquid.