Repair and service Audi A8 in body D2 with 1994 for 1999 of release.
1. Car operation
2. Maintenance service
3. Petrol engines of 2,8 l
4. Petrol engines of 3,7 and 4,2 l
5. Diesel engines of 2,5 l
5.1. The general data
5.2. Recommendations about engine removal
5.3. A pulley of the pump of the amplifier of a steering
5.4. A poliklinovoj belt
5.5. A gear belt
5.6. A cranked shaft
5.7. A head of the block of cylinders
5.8. The klapannyj mechanism
6. Diesel engines of 3,3 l
7. Systems of ignition and injection of fuel of petrol engines
8. System of release of the fulfilled gases of cars with petrol engines
9. The power supply system of diesel engines
10. System of prestarting heating of diesel engines
11. System of release of the fulfilled gases of cars with diesel engines
12. Greasing system
13. Cooling system
14. Coupling
15. A transmission
16. Shaft of a drive of forward wheels
17. Features of a design of transmission of all-wheel drive cars
18. A suspension bracket
19. Wheels and tyres
20. A steering
21. Brake system
22. A body
23. Heating and air-conditioning system
24. An electric equipment
25. Electric schemes
 










5-3-shkiv-nasosa-usilitelya-rulevogo-upravleniya.html

5.3. A pulley of the pump of the amplifier of a steering

Remove полиwedge a belt.

Fig. 3.3–21. An arrangement of bolts of fastening of a pulley semi wedge a belt of the pump of the amplifier of a steering and the special tool for deduction of a pulley from проворачивания



Unscrew bolts of fastening of a pulley semi wedge a belt of the pump of the amplifier of a steering, keeping a pulley from проворачивания the special tool (fig. 3.3–21).
At installation of a pulley the inscription «front» should be directed to a forward part of the engine.

Fig. 3.3–19. An arrangement and numbering of bolts of fastening of a mechanical transmission to the engine: And – an installation site of the aligning plug

Position the       Bolt the                Moment
                                             Inhalings, Н·м
1                  М12х80                      65
2                  М12х90                      65
3                  М10х50                      45
4                  М10х45                      45
5                  М10х135                    65
6                  М12х110                    65
7                  М12х67                      65



Fig. 3.3–20. An arrangement and numbering of bolts of fastening of an automatic transmission to the engine: And, In – installation sites of aligning plugs

Position the       Bolt the                Moment
                                            Inhalings, Н·м
1                  М12х80                     65
2                  М12х90                     65
3                  М10х60                     45
4                  М10х45                     45
5                  М10х80                     65
6                  М12х110                   65
6                  М12х67                     65



5.2. Recommendations about engine removal

5.4. A poliklinovoj belt