|
23-10-blok-upravleniya-e87-sistemojj-kondicionirovaniya.html
23.10. The block of management E87 a central airBefore removal of the block of management E87 consider malfunctions being in memory.
After replacement of the block of management E87 check up and if necessary correct a code, execute the basic installation and consider malfunctions.
If the display shows temperature 22 С, irrespective of the established temperature check up connection of the plug 30 according to the electric scheme.
The block of management E87 can be made active after ignition deenergizing (to 30 mines) button "Rest" pressing.
In case of wrong measurement of temperature by gauge G56 check up a condition of a lattice of an air inlet.
Cars with the gauge of quality of air G238 can be identified button A for automatic air recirculation (automatic рециркуляция air) instead of button Off on the block of management E87.
Removal
Blocks of management with indexes to K
Remove the central section of the panel of devices.
Disconnect electric sockets from an underside of the block of management.
|
|
Fig. 17–17. An arrangement of screws () fastenings of the block of management by air central air
|
Turn out four screws of fastening of the block of management and remove it (fig. 17–17).
If the block of management E87 does not leave the central section of the panel of devices, preliminary remove the furnish panel under a tree from the central section of the panel of devices.
Blocks of management with indexes to M
|
|
Fig. 17–18. Removal of an overlay of the central section of the panel of devices
|
Remove an overlay of the central section of the panel of devices (fig. 17–18).
Probably various execution of the decorative panel of cars with a radio receiver (with the big control panel) or the block of system of navigation, and also the block of management with the display on cars with heating of seats.
|
|
Fig. 17–19. An arrangement of screws () fastenings of the block of management by air central air
|
Turn out four screws of fastening of the block of management (fig. 17–19).
Disconnect electric sockets from an underside of the block of management.
Disconnect an electric socket of a heater of back glass.
Remove switches of heating of seats. For this purpose release clamps and, having pulled back, remove the switch.
Installation
Installation is spent to sequences, return to removal.
|