|
23-2-vozdukhozabornik-s-otkidnojj-stvorkojj.html
23.2. An air inlet with a folding shutterRemoval
Remove a casing of the ventilating chamber.
|
|
Fig. 17–2. An air inlet with a folding shutter: 1 – a lattice; 2 – the inlet channel; 3 – a folding shutter; 4 – the case
|
Remove a lattice 1 (fig. 17–2) from an air inlet.
Switch off ignition.
Disconnect a cable of management from an air inlet shutter.
Unscrew three bolts And and In (fig. 17–3) and disconnect a clip From fastening of a cover of a cable to the air inlet case.
|
|
Fig. 17–3. An arrangement of bolts (And,) fastenings of the inlet channel and a clip () fastenings of a cover of a cable of management
|
Remove the air inlet channel from the car.
Installation
Installation is spent to sequences, return to removal, taking into account the following.
Before installation of the inlet channel put hermetic D, 176 001 A3 in places With and
|
|
Fig. 17–4. Places of drawing of hermetic D 176 001 A3 before installation of the inlet channel
|
|
|
Fig. 17–5. The Installation site of additional soft rubber consolidation on a flange of the case of the inlet channel
|
If the windscreen mists over, lay soft rubber consolidation in diameter of 3 mm on a flange of the case of the inlet channel (fig. 17–5).
|