Repair and service Audi A8 in body D2 with 1994 for 1999 of release.
1. Car operation
2. Maintenance service
3. Petrol engines of 2,8 l
4. Petrol engines of 3,7 and 4,2 l
5. Diesel engines of 2,5 l
6. Diesel engines of 3,3 l
7. Systems of ignition and injection of fuel of petrol engines
8. System of release of the fulfilled gases of cars with petrol engines
9. The power supply system of diesel engines
10. System of prestarting heating of diesel engines
11. System of release of the fulfilled gases of cars with diesel engines
12. Greasing system
13. Cooling system
14. Coupling
15. A transmission
16. Shaft of a drive of forward wheels
17. Features of a design of transmission of all-wheel drive cars
18. A suspension bracket
19. Wheels and tyres
20. A steering
21. Brake system
22. A body
23. Heating and air-conditioning system
23.1. The general data
23.2. An air inlet with a folding shutter
23.3. The fan
23.4. The fan resistor
23.5. The pollen filter
23.6. The central ventilating lattices
23.7. A lateral ventilating lattice
23.8. The top lateral ventilating lattice
23.9. A lateral nozzle of defrosting
23.10. The block of management E87 a central air
23.11. An arm of the compressor of the conditioner
24. An electric equipment
25. Electric schemes
 










23-3-ventilyator.html

23.3. The fan

Removal
Remove a casing of the ventilating chamber.
Remove levers of screen wipers and the panel of furnish of a cowl.
Remove the air inlet channel.

Fig. 17–6. An arrangement of a bolt (1) and a clip (2) fastenings of the chamber рециркуляции



Unscrew bolts 1 (fig. 17–6) chamber fastenings рециркуляции.
Using a screw-driver edge, remove clips 2 and separate the chamber рециркуляции from a heater.
Remove two round ring air lines And from the fan (fig. 17–7).

Fig. 17–7. Elements of fastening of the fan: And – a ring air line; In, C – bolts; D – an air line



Unscrew bolts In and With and remove air line D.
Unscrew bolts And (fig. 17–8) fastenings of an arm of the fan In and remove the fan.

Fig. 17–8. An arrangement of bolts () arm fastenings () the fan




Installation
Installation is spent to sequences, return to removal.


23.2. An air inlet with a folding shutter

23.4. The fan resistor