Repair and service Audi A8 in body D2 with 1994 for 1999 of release.
1. Car operation
2. Maintenance service
3. Petrol engines of 2,8 l
4. Petrol engines of 3,7 and 4,2 l
5. Diesel engines of 2,5 l
6. Diesel engines of 3,3 l
7. Systems of ignition and injection of fuel of petrol engines
8. System of release of the fulfilled gases of cars with petrol engines
9. The power supply system of diesel engines
10. System of prestarting heating of diesel engines
11. System of release of the fulfilled gases of cars with diesel engines
12. Greasing system
13. Cooling system
14. Coupling
15. A transmission
15.1. A mechanical transmission
15.2. Removal and installation of a mechanical box
15.3. Repair of a mechanical transmission
15.4. An automatic transmission
15.5. Diagnostics of an automatic transmission
15.6. The selector of an automatic transmission
15.7. A cable of the selector of an automatic transmission
15.8. Removal and installation of an automatic transmission
16. Shaft of a drive of forward wheels
17. Features of a design of transmission of all-wheel drive cars
18. A suspension bracket
19. Wheels and tyres
20. A steering
21. Brake system
22. A body
23. Heating and air-conditioning system
24. An electric equipment
25. Electric schemes
 










15-3-remont-mekhanicheskojj-korobki-peredach.html

15.3. Repair of a mechanical transmission

The transmission represents the difficult unit, therefore it is recommended to repair it at the firm service enterprises. At removal and installation of many details it is necessary to measure backlashes and if necessary to adjust them, using corresponding adjusting linings and washers. If the transmission is faulty or works with strong noise, it is desirable to charge its repair to the expert or to replace a transmission that can manage much more cheaply. However the part of malfunctions of a transmission can be eliminated without its removal from the car.
Despite all complexities, the skilled expert can repair a transmission and in garage conditions, having the special tool and performing work consistently, step by step marking the executed operations. At transmission repair it is necessary to use special flat-nose pliers for removal of lock rings, strippers for bearings, an inertial hammer, a set of punches, a micrometer and a hydraulic press.
Before transmission removal try to define most precisely malfunction of a transmission that further considerably will facilitate repair.



15.2. Removal and installation of a mechanical box

15.4. An automatic transmission