Repair and service Audi A8 in body D2 with 1994 for 1999 of release.
1. Car operation
2. Maintenance service
3. Petrol engines of 2,8 l
4. Petrol engines of 3,7 and 4,2 l
5. Diesel engines of 2,5 l
6. Diesel engines of 3,3 l
7. Systems of ignition and injection of fuel of petrol engines
8. System of release of the fulfilled gases of cars with petrol engines
9. The power supply system of diesel engines
10. System of prestarting heating of diesel engines
11. System of release of the fulfilled gases of cars with diesel engines
12. Greasing system
13. Cooling system
14. Coupling
15. A transmission
15.1. A mechanical transmission
15.2. Removal and installation of a mechanical box
15.3. Repair of a mechanical transmission
15.4. An automatic transmission
15.5. Diagnostics of an automatic transmission
15.6. The selector of an automatic transmission
15.7. A cable of the selector of an automatic transmission
15.8. Removal and installation of an automatic transmission
16. Shaft of a drive of forward wheels
17. Features of a design of transmission of all-wheel drive cars
18. A suspension bracket
19. Wheels and tyres
20. A steering
21. Brake system
22. A body
23. Heating and air-conditioning system
24. An electric equipment
25. Electric schemes
 










15-1-mekhanicheskaya-korobka-peredach.html

15.1. A mechanical transmission

The transmission will transform a twisting moment transferred from the engine, on size and a direction. It is necessary for maintenance of optimum speed and passableness of the car, and also for the most economic work of the engine and for movement of the car by a backing. Besides, transmissions separates the engine and transmission during a stop and parking of the car and at its movement by inertia with working engine.
Transmission details are placed in картере which bolts fastens to a back part of the engine.
The twisting moment from the engine through coupling is transferred to a leading shaft of a transmission. A conducted shaft the transmission transfers a twisting moment through differential to drive shaft. Transfer inclusion is carried out by moving sliding муфты the synchronizer therefore the gear wheel rigidly incorporates to transmission shaft.
The transmission represents its very difficult unit it is recommended to repair in a specialised workshop, therefore in the present section removal and transmission installation are resulted only.
For transmission removal it is necessary to lift the car and to fix it in this position. Also use of a stationary jack is necessary.


15. A transmission

15.2. Removal and installation of a mechanical box