Repair and service Audi A8 in body D2 with 1994 for 1999 of release.
1. Car operation
2. Maintenance service
3. Petrol engines of 2,8 l
4. Petrol engines of 3,7 and 4,2 l
5. Diesel engines of 2,5 l
6. Diesel engines of 3,3 l
7. Systems of ignition and injection of fuel of petrol engines
8. System of release of the fulfilled gases of cars with petrol engines
9. The power supply system of diesel engines
10. System of prestarting heating of diesel engines
11. System of release of the fulfilled gases of cars with diesel engines
12. Greasing system
13. Cooling system
14. Coupling
14.1. The general data
14.2. The main cylinder of coupling
14.3. Removal of air from a hydraulic drive of coupling
14.4. The mechanism of deenergizing of coupling
14.5. A conducted disk of coupling
15. A transmission
16. Shaft of a drive of forward wheels
17. Features of a design of transmission of all-wheel drive cars
18. A suspension bracket
19. Wheels and tyres
20. A steering
21. Brake system
22. A body
23. Heating and air-conditioning system
24. An electric equipment
25. Electric schemes
 



Ремонт помещений в зеленограде читать дальше.
эротические видео чаты







14-4-mekhanizm-vyklyucheniya-scepleniya.html

14.4. The mechanism of deenergizing of coupling

Notes

Fig. 8–5. The mechanism of deenergizing of coupling: 1 – the working cylinder of coupling; 2 – a bolt; 3 – an arm; 4 – a pusher; 5 – тарельчатая a washer; 6 – consolidation of a leading shaft of a transmission; 7 – самоконтрящийся a bolt, 35 Нм; 8 – the bearing of deenergizing of coupling; 9 – the lever of deenergizing of coupling; 10 – a fixing spring; 11 – муфта coupling deenergizings; 12 – a sealing ring; 13 – an intermediate element; 14 – a hairpin with a spherical finger, 25 Нм, 15 – a transmission


Before ввинчиванием 2 (fig. 8–5) it is necessary to put on a carving of a bolt контровочный structure D 185.
The convex party of a washer 5 should be directed to directing plug.
Installation of a sealing ring is spent against the stop.
At installation it is necessary to use a new bolt 7.
Do not wash out the bearing of deenergizing of coupling in solvent not to wash up from it greasing. The bearing publishing noise at rotation, it is necessary to replace.
At installation the working surface of the lever of deenergizing of coupling is greased консистентной with greasing Z 381 351 THOSE.
The fixing spring 10 fastens on the lever of deenergizing of coupling.
At installation it is necessary to use a new sealing ring 12.
The spherical finger is greased with greasing on a basis дисульфида molybdenum.

Greasing is put on a head of a pusher 4 (fig. 8–5 see) on a basis дисульфида molybdenum.
Before installation of the working cylinder of a drive of coupling in картер transmissions it is necessary landing area

Fig. 8–6. The working cylinder of a drive of coupling


And (fig. 8–6) to grease with a thin layer of greasing.

Fig. 8–7. Fastening of the working cylinder of a drive of coupling: 1 – a tube; 2 – a bolt; 3 arm; 4 – the working cylinder


Establish and fix on the working cylinder an arm of fastening of a tube (fig. 8–7).


14.3. Removal of air from a hydraulic drive of coupling

14.5. A conducted disk of coupling