|
16-1-obshhie-svedeniya.html
16.1. The general dataThe twisting moment from a transmission to driving wheels is transferred by means of drive shaft.
Each shaft consists of three parts: internal and external hinges of equal angular speeds (SHRUS) and the shaft.
The shlitsevaja part of the external hinge is inserted into a nave of a wheel and fixed by a nut. SHRUS are greased консистентной with greasing which is replaced only at hinge dismantling.
Covers should be checked periodically on damages and greasing leak.
Greasing follows from the hinge at an impulse of a protective cover or easing of collars of fastening.
It is necessary to replace the torn protective covers of SHRUS immediately, damage of hinges differently is possible. Cover replacement includes removal of a shaft of a drive.
Vibration and the raised noise at трогании from a place, braking by the engine and on sharp turns arise at deterioration of hinges of equal angular speeds, шлицевых connections of a shaft and at easing of an inhaling of bolts of fastening of wheels.
Notes
|
|
Fig. 10–1. A shaft of a drive of type трипод: 1 – a washer; 2 – a persistent ring; 3 – a spring ring; 4 – the external hinge of equal angular speeds; 5 – a bolt; 6, 11 – protective covers; 7, 9, 10, 12 – collars; 8 – a drive shaft; 13 – a cover; 14 – a sealing ring; 15 – a lock ring; 16 – a hinge holder; 17 – a roller; 18 – bolt М10х20, 70 Нм; 19 – the hinge case
|
The concave party the washer 1 (fig. 10–1) should adjoin to a persistent ring.
At installation it is necessary to use a new spring ring 3. Before installation of the SHRUS it establish in a flute of a shaft of a drive.
In the presence of attritions and cracks it is necessary to use a new protective cover.
The facet on шлицах the holder of rollers should be directed to a drive shaft.
|
Technical characteristics
|
|
|
The hinge of equal angular speeds with three rollers
|
|
|
Konsistentnaja greasing:
|
|
|
The external hinge in diameter of 98 and 108 mm
|
G 000 633
|
|
The hinge with three rollers
|
G 000 605
|
|
Quantity консистентной greasings, г
|
|
|
The external hinge in diameter of 98 mm:
|
|
|
Greasing total
|
120
|
|
Filling in the hinge
|
80
|
|
Filling in a protective cover
|
40
|
|
The internal hinge in diameter of 100 mm:
|
|
|
Greasing total
|
80
|
|
Filling in the hinge
|
30
|
|
Filling in a protective cover
|
50
|
|
The internal hinge in diameter of 108 mm:
|
|
|
Greasing total
|
120
|
|
Filling in the hinge
|
35
|
|
Filling in a protective cover
|
85
|
|
|
|
|
The inhaling moments, Н*м
|
|
|
Drive shaft to a leading flange of a transmission:
|
|
|
Bolts М8
|
40
|
|
Bolts М10
|
70
|
|
Gauge ABS to a rotary fist
|
10
|
|