18.4. A rotary fist
Using a screw-driver edge as the lever, remove a cap from the central part of a disk of a wheel.
On the car standing on wheels, loosen the bolts of fastening of shaft of a drive to naves of forward wheels.
Lift a forward part of the car and fix on supports. Remove forward wheels.
Fig. 12–11. An arrangement of gauge ABS (3), clips of fastening of wires of gauges ABS (2) and deterioration brake pads (1), bolts (4) fastenings of a support
Release from a clip 1 (fig. 12–11). A wire of the gauge of deterioration brake pads
Take gauge ABS 3 of a rotary fist and disconnect from a clip of 2 wires of the gauge.
Unscrew bolts 4, remove a support of a forward brake and a soft wire adhere a support to a body. The support should not hang on a brake hose.
Remove a brake disk.
Fig. 12–4. Elements of the top fastening of a rotary fist: 1 – a nut and a bolt of fastening of spherical hinges of the top levers of a forward suspension bracket; 2 – spherical hinges of the top levers of a forward suspension bracket; 3 – a bolt of fastening of a tip of steering draught; 4 – a bolt with a tetrahedral head
Unscrew bolts of fastening of a tip of steering bent for to a rotary fist (fig. 12–4 see).
Fig. 12–12. An arrangement of nuts (1 and 3) fastenings of spherical hinges of the bottom levers of a forward suspension bracket and a bolt (2) fastenings of a protective casing
Unscrew bolts and remove a protective casing of a brake disk (fig. 12–12).
Using a stripper of spherical hinges, take spherical hinges of the bottom keeping and operating levers from a rotary fist. Thus do not damage a protective cover of the hinge of equal angular speeds of a shaft of a drive.
Unscrew a bolt with a fillet of fastening of a shaft of a drive.
Unscrew a nut, take a bolt of fastening of spherical hinges of the top levers of a forward suspension bracket to a rotary fist (fig. 12–4 see) and remove spherical hinges from a rotary fist. Do not expand grooves in a rotary fist at extraction of the top cross-section levers.
Having rejected aside from the car a rotary fist, take a shaft of a drive from a nave of a forward wheel and a spherical tip of the bottom operating lever from a rotary fist.
Remove a rotary fist from the car.
Installation is spent to sequences, return to removal, taking into account the following.
Screw in and tighten bolts of fastening of external SHRUS to naves of forward wheels the moment 190 Нм, then in addition tighten them on a corner 180 . Tighten bolts of fastening of shaft of a drive to naves of forward wheels only on the car standing on wheels.