14.4. The mechanism of deenergizing of coupling
Fig. 8–5. The mechanism of deenergizing of coupling: 1 – the working cylinder of coupling; 2 – a bolt; 3 – an arm; 4 – a pusher; 5 – тарельчатая a washer; 6 – consolidation of a leading shaft of a transmission; 7 – самоконтрящийся a bolt, 35 Нм; 8 – the bearing of deenergizing of coupling; 9 – the lever of deenergizing of coupling; 10 – a fixing spring; 11 – муфта coupling deenergizings; 12 – a sealing ring; 13 – an intermediate element; 14 – a hairpin with a spherical finger, 25 Нм, 15 – a transmission
Before ввинчиванием 2 (fig. 8–5) it is necessary to put on a carving of a bolt контровочный structure D 185.
The convex party of a washer 5 should be directed to directing plug.
Installation of a sealing ring is spent against the stop.
At installation it is necessary to use a new bolt 7.
Do not wash out the bearing of deenergizing of coupling in solvent not to wash up from it greasing. The bearing publishing noise at rotation, it is necessary to replace.
At installation the working surface of the lever of deenergizing of coupling is greased консистентной with greasing Z 381 351 THOSE.
The fixing spring 10 fastens on the lever of deenergizing of coupling.
At installation it is necessary to use a new sealing ring 12.
The spherical finger is greased with greasing on a basis дисульфида molybdenum.
Greasing is put on a head of a pusher 4 (fig. 8–5 see) on a basis дисульфида molybdenum.
Before installation of the working cylinder of a drive of coupling in картер transmissions it is necessary landing area
Fig. 8–6. The working cylinder of a drive of coupling
And (fig. 8–6) to grease with a thin layer of greasing.
Fig. 8–7. Fastening of the working cylinder of a drive of coupling: 1 – a tube; 2 – a bolt; 3 arm; 4 – the working cylinder
Establish and fix on the working cylinder an arm of fastening of a tube (fig. 8–7).